Nanosponge hydrogel of octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate of Alcaligenes faecalis.

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded ß-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: • Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. • The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. • Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.

Innovative approaches for mycotoxin detection in various food categories.

Mycotoxins (MTs), produced by filamentous fungi, represent a severe hazard to the health of humans and food safety, affecting the quality of various agricultural products. They can contaminate a wide range of foods, during any processing phase before or after harvest. Animals and humans who consume MTs-contaminated food or feed may experience acute or chronic poisoning, which may result in serious pathological consequences. Accordingly, developing rapid, easy, and accurate methods of MTs detection in food becomes highly urgent and critical as a quality control and to guarantee food safety and lower health hazards. In this review, we highlighted and discussed innovative approaches like biosensors, fluorescent polarization, capillary electrophoresis, infrared spectroscopy, and electronic noses for MT identification pointing out current challenges and future directions. The limitations, current challenges, and future directions of conventional detection methods versus innovative methods have also been highlighted and discussed.

Statistical optimization and gamma irradiation on cephalosporin C production by Acremonium chrysogenum W42-I.

Most antibiotics now used in clinical practice are cephalosporins. Acremonium (A.) chrysogenum W42-I is an intermediate strain out of W42 strain improvement program whose productivity is above that of the wild-type strain to produce the broad-spectrum antibacterial cephalosporin C (CPC). As a result, fermentation process optimization is considered because it offers the ideal environment for strains to reach their full potential. Our research aimed to combine a rational design to regulate the fermentation process environment and culture media as well as to develop mutants with high productivity. Different media were tested to obtain maximum CPC production. To maximize the production of CPC, some environmental parameters were experimentally optimized via the Box-Behnken design used for response surface methodology (RSM). There were 17 tests conducted, and each experiment's reaction was recorded. Improvement of the CPC production was further achieved via mutagenesis using gamma radiation. Results revealed that a pH of 4, an incubation period of 4 days, and an inoculum size of 1% v/v using the optimized media (CPC2) were the optimum conditions for enhancing the CPC production by 4.43-fold. In addition, gamma irradiation further enhanced production to reach 3.46-fold using an optimum dose of 2 KGy. In conclusion, in comparison to initial production levels, CPC production increased 4.43-fold because of nutritional and environmental optimization. The mutant AC8 demonstrated a roughly 3.46-fold increase in activity against its parent type. Moreover, subsequent AC8 mutant culture demonstrated excellent genetic stability.

Identification, Characterization, and Production Optimization of 6-Methoxy-1H-Indole-2-Carboxylic Acid Antifungal Metabolite Produced by Bacillus toyonensis Isolate OQ071612.

Fungal infections currently pose a real threat to human lives. In the current study, soil bacterial isolates were screened for the production of antifungal compounds to combat human fungal pathogens. Notably, the bacterial F1 isolate exhibited antimycotic action towards the Candida albicans ATCC 10231 and Aspergillus niger clinical isolates. By employing phenotypic and molecular techniques, we identified the F1 isolate as the Bacillus toyonensis isolate OQ071612. The purified extract showed stability within a pH range of 6-7 and at temperatures of up to 50 °C. It demonstrated potential antifungal activity in the presence of various surfactants, detergents, and enzymes. The purified extract was identified as 6-methoxy-1H-Indole-2-carboxylic acid using advanced spectroscopic techniques. To optimize the antifungal metabolite production, we utilized response surface methodology (RSM) with a face-centered central composite design, considering nutritional and environmental variables. The optimal conditions were as follows: starch (5 g/L), peptone (5 g/L), agitation rate of 150 rpm, pH 6, and 40 °C temperature. A confirmatory experiment validated the accuracy of the optimization process, resulting in an approximately 3.49-fold increase in production. This is the first documented report on the production and characterization of 6-methoxy-1H-Indole-2-carboxylic acid (MICA) antifungal metabolite from Bacillus toyonensis.

Evaluation of ELISA and immunoaffinity fluorometric analytical tools of four mycotoxins in various food categories.

Mycotoxins (MTs) are secondary toxic metabolites that can contaminate food, impacting quality and safety, leading to various negative health effects and serious pathological consequences conferring urgent need to evaluate and validate the currently standard methods used in their analysis. Therefore, this study was aimed to validate ELISA and VICAM immunoaffinity fluorometric, the two common methods used to monitor the level of MTs according to the Egyptian Organization for Standardization and Quality Control. A total of 246 food samples were collected and tested for Aflatoxins (196 samples), Ochratoxin A (139), Zearalenone (70), and Deoxynivalenol (100) using both analytical methods. Results showed that aflatoxins exceeded limits in 42.9, 100, and 13.3% of oily seeds, dried fruits, and chili and spices, respectively. For ochratoxin A, 3.9% of Gramineae and 8% of spices and chili (locally sourced) exceeded the limits, while 17.6% of imported pasta and noodles exceeded the limits for deoxynivalenol. Significant differences for the aflatoxins and ochratoxin A detection among different categories of chocolate, dried fruits, and oily seeds (p-value < 0.05). No zearalenone contamination was detected in the exported, imported, and locally sourced categories. No deoxynivalenol contamination was detected in the tested Gramineae category. In contrast, for pasta and noodles, the imported samples exhibited the highest contamination rate (above the upper limit of 750 µg/kg) with 17.6% of the samples testing positive for deoxynivalenol with no significant difference among different sample categories of Gramineae, pasta, and noodles (p-value > 0.05). In conclusion, our study found no significant differences between the ELISA and immunoaffinity fluorometric analysis in the detection of the respective MTs in various food categories and therefore, they can substitute each other whenever necessary. However, significant differences were observed among different food categories, particularly the local and imported ones, highlighting the urgent need for strict and appropriate control measures to minimize the risk of MTs adverse effects.

Statistical optimization of a podoviral anti-MRSA phage CCASU-L10 generated from an under sampled repository: Chicken rinse.

Introduction: The insurgence of antimicrobial resistance is an imminent health danger globally. A wide range of challenging diseases are attributed to methicillin-resistant Staphylococcus aureus (MRSA) as it is weaponized with a unique array of virulence factors, and most importantly, the resistance it develops to most of the antibiotics used clinically. On that account, the present study targeted the optimization of the production of a bacteriophage active against MRSA, and evaluating some of its characters. Methods and results: The bacteriophage originated from a quite peculiar environmental source, raw chicken rinse and was suggested to belong to Podoviridae, order Caudovirales. It withstood a variety of extreme conditions and yield optimization was accomplished via the D-optimal design by response surface methodology (RSM). A reduced quadratic model was generated, and the ideal production conditions recommended were pH 8, glycerol 0.9% v/v, peptone 0.08% w/v, and 107 CFU/ml as the host inoculum size. These conditions led to a two-log fold increase in the phage titer (1.17x10¹² PFU/ml), as compared to the regular conditions. Discussion: To conclude, statistical optimization successfully enhanced the output of the podoviral phage titer by two-log fold and therefore, can be regarded as a potential scale-up strategy. The produced phage was able to tolerate extreme environmental condition making it suitable for topical pharmaceutical preparations. Further preclinical and clinical studies are required to ensure its suitability for use in human.

State of the art in epitope mapping and opportunities in COVID-19.

The understanding of any disease calls for studying specific biological structures called epitopes. One important tool recently drawing attention and proving efficiency in both diagnosis and vaccine development is epitope mapping. Several techniques have been developed with the urge to provide precise epitope mapping for use in designing sensitive diagnostic tools and developing rpitope-based vaccines (EBVs) as well as therapeutics. In this review, we will discuss the state of the art in epitope mapping with a special emphasis on accomplishments and opportunities in combating COVID-19. These comprise SARS-CoV-2 variant analysis versus the currently available immune-based diagnostic tools and vaccines, immunological profile-based patient stratification, and finally, exploring novel epitope targets for potential prophylactic, therapeutic or diagnostic agents for COVID-19.

Epitope mapping is an important tool recently proving efficiency in both diagnosis and vaccine development. Several epitope mapping techniques have been developed for designing sensitive diagnostic tools and developing rpitope-based vaccines (EBVs) as well as therapeutics. In this review, we will discuss the state of the art in epitope mapping, emphasizing accomplishments and opportunities in combating COVID-19. These comprise SARS-CoV-2 variant analysis versus the currently available immune-based diagnostic tools and vaccines and exploring novel epitope targets for potential prophylactic, therapeutic or diagnostic agents for COVID-19.

An Anti-MRSA Phage From Raw Fish Rinse: Stability Evaluation and Production Optimization.

Accumulating evidence has denoted the danger of resistance in tenacious organisms like methicillin-resistant Staphylococcus aureus (MRSA). MRSA, a supple bacterium that adopts a variety of antibiotic resistance mechanisms, is the cause of multiple life-threatening conditions. Approaching a post-antibiotic era, bacteria-specific natural predators, bacteriophages, are now given the chance to prove eligible for joining the antibacterial weaponry. Considering the foregoing, this study aimed at isolating bacteriophages with promising anti-MRSA lytic activity, followed by characterization and optimization of the production of the bacteriophage with the broadest host range. Five phages were isolated from different environmental sources including the rinse of raw chicken egg, raw milk, and, remarkably, the raw meat rinses of chicken and fish. Examined for lytic activity against a set of 23 MRSA isolates collected from various clinical specimens, all five phages showed relatively broad host ranges with the bacteriophage originally isolated from raw fish rinse showing lytic activity against all the isolates tested. This phage is suggested to be a member of Siphoviridae family, order Caudovirales, as revealed by electron microscopy. It also exhibited good thermal stability and viability at different pH grades. Moreover, it showed reasonable stability against UV light and all viricidal organic solvents tested. Optimization using D-optimal design by response surface methodology was carried out to enhance the phage yield. The optimum conditions suggested by the generated model were a pH value of 7, a carbon source of 0.5% w/v sucrose, and a nitrogen source of 0.1% w/v peptone, at a temperature of 28°C and a bacterial inoculum size of 107 CFU/ml, resulting in a 2 log-fold increase in the produced bacteriophage titer. Overall, the above findings indicate the lytic ability inflicted by this virus on MRSA. Apparently, its stability under some of the extreme conditions tested implies its potential to be a candidate for pharmaceutical formulation as an anti-MRSA therapeutic tool. We hope that bacteriophages could tip the balance in favor of the human front in their battle against multidrug-resistant pathogens.

New insights on mucormycosis and its association with the COVID-19 pandemic.

COVID-19 continues to cause significant fatality worldwide. Glucocorticoids prove to play essential roles in COVID-19 management; however, the extensive use of steroids together with the virus immune dysregulation may increase the danger of secondary infections with mucormycosis, an angioinvasive fungal infection. Unfortunately, a definite correlation between COVID-19 and elevated mucormycosis infection cases is now clear worldwide. In this review, we discuss the historical record and epidemiology of mucormycosis as well as pathogenesis and associated host immune response, risk factors, clinical presentation, diagnosis and treatment. Special emphasis is given to its association with the current COVID-19 pandemic, including latest updates on COVID-19-associated mucormycosis cases globally, with recommendations for efficacious management.

Cloning and sequencing of lsaE efflux pump gene from MDR Enterococci and its role in erythromycin resistance.

Enterococci are opportunistic members of intestinal microbiota with notable ability to transmit antimicrobial resistance genes. Among the different resistance mechanisms, multidrug efflux is evolving as a huge problem in conferring multidrug resistance to bacterial cells because these pumps extrude a broad range of antimicrobials. Therefore, the aim of this work was to evaluate role of efflux pumps in the development of multi-drug resistance in Enterococci through studying the antimicrobial resistance profiles of Enterococci isolates, phenotypically and genotypically investigating the role of active efflux pumps in development of resistance, in addition to characterizing the most common efflux pump genes. The study involved the recovery of 149 Enterococci isolates from specimens of patients suffering infections in some hospitals in Egypt. Antimicrobial resistance profiles of isolates showed that only 1.3% of the isolates were resistant to each of linezolid, daptomycin, and fosfomycin. The highest resistance was to ampicillin (60.4%) while 47 of the isolates (31.54%) were found to be multidrug-resistant. Efflux pumps have shown to have a significant role in erythromycin resistance in 11 isolates (23.4% of MDR isolates) as indicated by an 8 or more fold decrease in minimum inhibitory concentration in the presence of the efflux pump inhibitor, carbonyl cyanide m- chlorophenylhydrazone (CCCP). End point PCR was used to detect efflux pump genes lsaE, msrC, and mefA in the 11 isolates at which efflux pumps were found to play a significant role in resistance. Nine out of the 11 isolates (81.8%) were found to carry lsaE gene. This gene was inserted into pUC21 vector and cloned into DH5α E. coli resulting in successful transformation and expression of erythromycin resistance in this host. Finally, sequencing of the lsaE gene was carried out. To the best of our knowledge, this is the first report on the cloning of lsaE gene from MDR Enterococcus isolates.

Rekindling of a Masterful Precedent; Bacteriophage: Reappraisal and Future Pursuits.

Antibiotic resistance is exuberantly becoming a deleterious health problem world-wide. Seeking innovative approaches is necessary in order to circumvent such a hazard. An unconventional fill-in to antibiotics is bacteriophage. Bacteriophages are viruses capable of pervading bacterial cells and disrupting their natural activity, ultimately resulting in their defeat. In this article, we will run-through the historical record of bacteriophage and its correlation with bacteria. We will also delineate the potential of bacteriophage as a therapeutic antibacterial agent, its supremacy over antibiotics in multiple aspects and the challenges that could arise on the way to its utilization in reality. Pharmacodynamics, pharmacokinetics and genetic engineering of bacteriophages and its proteins will be briefly discussed as well. In addition, we will highlight some of the in-use applications of bacteriophages, and set an outlook for their future ones. We will also overview some of the miscellaneous abilities of these tiny viruses in several fields other than the clinical one. This is an attempt to encourage tackling a long-forgotten hive. Perhaps, one day, the smallest of the creatures would be of the greatest help.

Latest updates on SARS-CoV-2 genomic characterization, drug, and vaccine development; a comprehensive bioinformatics review.

Amid the COVID-19 outbreak, several bioinformatic analyses have been conducted on SARS-CoV-2 virus genome. Numerous studies rushed to fill the gap about this novel virus. Comparison with other related sequences, structural predictions of the produced proteins, determination of variations in amino acid residues and depiction of possible drug and vaccine targets have been the focus of scientific research from the beginning of this year. In addition to discussing the viral taxonomy, clinical features, life cycle, and genome organization, this review will focus on the recent updates in genome and viral proteins characterization and potential therapeutic and vaccine candidates developed so far. Comparative studies with related genomes and proteins provide understanding for the viral molecular mechanisms and suggest targets for therapeutics and vaccinology trials to stop the escalation of this new virus. This pandemic, with its resulting social and economic afflictions, will definitely have significant marks on our lives in the following years.

Production and statistical optimization of Paromomycin by Streptomyces rimosus NRRL 2455 in solid state fermentation.

BACKGROUND: Paromomycin is a 2-deoxystreptamine aminocyclitol aminoglycoside antibiotic with broad spectrum activity against Gram-negative, Gram-positive bacteria and many protozoa. This study introduces a strategy for paromomycin production through solid-state fermentation using Streptomyces rimosus subsp. paromomycinus NRRL 2455. Solid state fermentation has gained enormous attention in the development of several products because of their numerous advantages over submerged liquid fermentation. After selecting the best solid substrate, a time course study of paromomycin production was carried out followed by optimization of environmental conditions using response surface methodology. Paromomycin yields obtained using this technique were also compared to those obtained using submerged liquid fermentation. RESULTS: Upon screening of 6 different substrates, maximum paromomycin concentration (0.51 mg/g initial dry solids) was obtained with the cost-effective agro-industrial byproduct, corn bran, impregnated with aminoglycoside production media. Optimization of environmental conditions using D-optimal design yielded a 4.3-fold enhancement in paromomycin concentration reaching 2.21 mg/g initial dry solids at a pH of 8.5, inoculum size of 5% v/w and a temperature of 30 °C. CONCLUSION: Compared to submerged liquid fermentation, solid state fermentation resulted in comparable paromomycin concentrations, cost reduction of raw materials, less energy consumption and waste water discharge, which have major implications in industrial fermentation. Therefore, solid state fermentation is a promising alternative to submerged liquid fermentation for paromomycin production. To the best of our knowledge, this is the first report on the optimized paromomycin production through solid state fermentation process.

Lysinibacillus Isolate MK212927: A Natural Producer of Allylamine Antifungal 'Terbinafine'.

Resistance to antifungal agents represents a major clinical challenge, leading to high morbidity and mortality rates, especially in immunocompromised patients. In this study, we screened soil bacterial isolates for the capability of producing metabolites with antifungal activities via the cross-streak and agar cup-plate methods. One isolate, coded S6, showed observable antifungal activity against Candida (C.) albicans ATCC 10231 and Aspergillus (A.) niger clinical isolate. This strain was identified using a combined approach of phenotypic and molecular techniques as Lysinibacillus sp. MK212927. The purified metabolite displayed fungicidal activity, reserved its activity in a relatively wide range of temperatures (up to 60 °C) and pH values (6-7.8) and was stable in the presence of various enzymes and detergents. As compared to fluconazole, miconazole and Lamisil, the minimum inhibitory concentration of the metabolite that showed 90% inhibition of the growth (MIC90) was equivalent to that of Lamisil, half of miconazole and one fourth of fluconazole. Using different spectroscopic techniques such as FTIR, UV spectroscopy, 1D NMR and 2D NMR techniques, the purified metabolite was identified as terbinafine, an allylamine antifungal agent. It is deemed necessary to note that this is the first report of terbinafine production by Lysinibacillus sp. MK212927, a fast-growing microbial source, with relatively high yield and that is subject to potential optimization for industrial production capabilities.

Comparing cefotaxime and ceftriaxone in combating meningitis through nose-to-brain delivery using bio/chemoinformatics tools.

Bio/chemoinformatics tools can be deployed to compare antimicrobial agents aiming to select an efficient nose-to-brain formulation targeting the meningitis disease by utilizing the differences in the main structural, topological and electronic descriptors of the drugs. Cefotaxime and ceftriaxone were compared at the formulation level (by comparing the loading in gelatin and tripalmitin matrices as bases for the formation of nanoparticulate systems), at the biopharmaceutical level (through the interaction with mucin and the P-gp efflux pumps) and at the therapeutic level (through studying the interaction with S. pneumoniae bacterial receptors). GROMACS v4.6.5 software package was used to carry-out all-atom molecular dynamics simulations. Higher affinity of ceftriaxone was observed compared to cefotaxime on the investigated biopharmaceutical and therapeutic macromolecules. Both drugs showed successful docking on mucin, P-gp efflux pump and S. pneumoniae PBP1a and 2b; but ceftriaxone showed higher affinity to the P-gp efflux pump proteins and higher docking on mucin. Ceftriaxone showed less out-of-matrix diffusion and higher entrapment on the gelatin and the tripalmitin matrices. Accordingly, Ceftriaxone gelatin nanospheres or tripalmitin solid lipid nanoparticles may pose a more feasible and efficient nose-to-brain formulation targeting the meningitis disease compared to the cefotaxime counterparts.

Structural and Physicochemical Characterization of Rhamnolipids produced by Pseudomonas aeruginosa P6.

Rhamnolipids are important biosurfactants for application in bioremediation, enhanced oil recovery, pharmaceutical, and detergent industry. In this study, rhamnolipids extracted from P. aeruginosa P6 were characterized to determine their potential fields of application. Thin-layer chromatographic analysis of the produced rhamnolipids indicated the production of two homologues: mono- and di-rhamnolipids, whose structures were verified by 1H and 13C nuclear magnetic resonance spectroscopy. Additionally, high performance liquid chromatography-mass spectrometry identified seven different rhamnolipid congeners, of which a significantly high proportion was di-rhamnolipids reaching 80.16%. Rha-Rha-C10-C10 was confirmed as the principal compound of the rhamnolipid mixture (24.30%). The rhamnolipids were capable of lowering surface tension of water to 36 mN/m at a critical micelle concentration of 0.2 g/L, and exhibited a great emulsifying activity (E24 = 63%). In addition, they showed excellent stability at pH ranges 4-8, NaCl concentrations up to 9% (w/v) and temperatures ranging from 20 to 100 °C and even after autoclaving. These results suggest that rhamnolipids, produced by P. aeruginosa P6 using the cheap substrate glycerol, are propitious for biotechnology use in extreme and complex environments, like oil reservoirs and hydrocarbon contaminated soil. Moreover, P. aeruginosa P6 may be considered, in its wild type form, as a promising industrial producer of di-RLs, which have superior characteristics for potential applications and offer outstanding commercial benefits.

Octadecyl 3-(3, 5-di-tert-butyl-4-hydroxyphenyl) propanoate, an antifungal metabolite of Alcaligenes faecalis strain MT332429 optimized through response surface methodology.

In the current study, a soil bacterial isolate F2 expressed a significant antagonistic activity against Candida albicans ATCC 10231 and Aspergillus niger clinical isolate confirmed through cross streak, dual culture, and agar well diffusion methods. The isolate F2 was identified using phenotypic and molecular approaches as Alcaligenes (A.) faecalis MT332429. The identification and structural characterization of the antifungal compound was performed using advanced spectroscopic techniques including UV absorbance, 1H and 13C NMR and 2D NMR (COSY, HSQC, and HMBC) and was identified as octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate. Response surface methodology (RSM) using a central composite design was employed to optimize the nutritional and cultural variables affecting the antifungal metabolite yield. The optimum conditions were found to be temperature 30 °C, agitation 150 rpm, glucose 1 g/l, peptone 2 g/l, and pH 8. A confirmatory experiment was performed to assess the accuracy of the optimization procedure, where an increase in the antifungal metabolite production by about 2.48-fold was obtained. To the best of our knowledge, this is the first report of octadecyl 3-(3, 5-di-tert-butyl-4-hydroxyphenyl) propanoate recovered from the culture broth of A. faecalis MT332429 with a promising antifungal activity along with its optimized production through RSM. KEY POINTS: • A novel soil bacterial isolate, F2, identified as Alcaligenes faecalis MT332429, showed significant antagonistic activity against Candida albicans ATCC 10231 and Aspergillus niger clinical isolate. • This stable fungicidal extracellular metabolite was identified as octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate. • Optimization using central composite design resulted in 2.48-fold increase in production reaching 213.82 µg/ml.

Optimized Production of the Allylamine Antifungal "Terbinafine" by Lysinibacillus Isolate MK212927 Using Response Surface Methodology.

PURPOSE: We aimed to optimize the factors affecting the production of the allylamine antifungal, terbinafine, by Lysinibacillus isolate MK212927, a natural producer of this broad-spectrum fungicidal compound. METHODS: We employed a central composite design to optimize the five most important variables influencing the production of terbinafine which were carbon source, nitrogen source, temperature, pH and agitation. RESULTS: The optimum conditions were found to be starch 5 g/L, ammonium chloride 5 g/L, temperature 32°C, agitation 150 rpm and pH 7. The actual response (inhibition zone diameter) was highly comparable to the value predicted by the model, indicating a valid model. Using the standard calibration curve of terbinafine, the optimized conditions resulted in an increase in the antifungal metabolite production (terbinafine) by about 1.6-fold (1814.662 µg/mL compared to 1165.550 µg/mL under standardized conditions). CONCLUSION: This is the first report, to the best of our knowledge, on optimized production of terbinafine by Lysinibacillus species. Hence, these findings may be useful as baseline data for scaling up the production of terbinafine from a natural microbial source.

Rhamnolipid production by a gamma ray-induced Pseudomonas aeruginosa mutant under solid state fermentation.

Solid-state fermentation has a special advantage of preventing the foaming problem that obstructs submerged fermentation processes for rhamnolipid production. In the present work, a 50:50 mixture of sugarcane bagasse and sunflower seed meal was selected as the optimum substrate for rhamnolipid production using a Pseudomonas aeruginosa mutant 15GR and an impregnating solution including 5% v/v glycerol. Using Box-Behnken design, the optimum fermentation conditions were found to be an inoculum size 1% v/v, temperature 30 °C and unlike other studies, pH 8. These optimized conditions yielded a 67% enhancement of rhamnolipid levels reaching 46.85 g rhamnolipids per liter of impregnating solution, after 10 days, which was about 5.5 folds higher than that obtained by submerged liquid fermentation. Although maximum rhamnolipids concentration was obtained after 10 days of incubation, rhamnolipids concentration already reached high levels (41.87 g/l) after only 6 days. This rhamnolipid level was obtained in a shorter time and using lower carbon source concentrations than most studies reported so far. The findings obtained indicate an enormous potential for employing solid-state fermentation for rhamnolipid production by the studied isolate.